SKU FL-MTC-W120
Water Mould Temperature Controller, 35–120 °C
Direct-cooled water unit for fast, precise mould heating up to 120 °C.
- Minimum order
- 1 unit
- Lead time
- Confirmed in quotation
- Warranty
- Confirmed in quotation
- Shipping terms
- FOB Shenzhen / CIF to your port
Prefer to talk? WhatsApp us or email sales@footline-supply.com.
Overview
A water-type mould temperature controller circulates heated water through the mould to keep it at a steady working temperature, essential for consistent EVA, PVC and PU sole moulding and short cycle times.
Direct cooling gives fast temperature drops. Dual-system versions control two moulds or mould halves independently.
Applications
- EVA and PVC injection moulds
- PU sole moulds
- Plastic injection and die-casting moulds
Key features
- Microcomputer PID control holds mould temperature within ±1 °C, with automatic stage control and compensation.
- Fast heating and cooling: high-efficiency heaters and a high-temperature pump shorten start-up time.
- Heating and cooling run through an indirect heat exchanger, so the circulating medium stays clean.
- Protection against phase loss, low liquid level, over-temperature and pump overload, with alarm display.
- Stainless-steel piping and heater housing resist corrosion and scaling.
- Compact cabinet on castors; easy to place beside the moulding machine.
Technical data
Available in 7 configurations. Scroll sideways on small screens to see every column.
| Parameter | Unit | 6 kW | 9 kW | 12 kW | 18 kW | Dual 6+6 kW | Dual 9+9 kW | Dual 12+12 kW |
|---|---|---|---|---|---|---|---|---|
| Heating capacity | kW | 6 | 9 | 12 | 18 | 6+6 | 9+9 | 12+12 |
| Input power | kW | 6.37 | 9.75 | 12.75 | 19.5 | 12.75 | 19.5 | 25.5 |
| Temperature range | °C | 35–120 (single system) | 35–120 (single system) | 35–120 (single system) | 35–120 (single system) | 35–120 (dual system) | 35–120 (dual system) | 35–120 (dual system) |
| Power supply | 3N-380 V / 415 V, 50 Hz | 3N-380 V / 415 V, 50 Hz | 3N-380 V / 415 V, 50 Hz | 3N-380 V / 415 V, 50 Hz | 3N-380 V / 415 V, 50 Hz | 3N-380 V / 415 V, 50 Hz | 3N-380 V / 415 V, 50 Hz | |
| Cooling method | Direct cooling | Direct cooling | Direct cooling | Direct cooling | Direct cooling | Direct cooling | Direct cooling | |
| Heat transfer medium | Water | Water | Water | Water | Water | Water | Water | |
| Cooling water piping | inch | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Circulating water piping | inch | 3/8×2 | 3/8×4 | 3/8×4 | 3/8×4 | 3/8×4 | 3/8×4 | 3/8×4 |
| Pump power | kW | 0.37 | 0.75 | 0.75 | 1.5 | 0.37×2 | 0.75×2 | 0.75×2 |
| Pump head | kPa | 240 | 300 | 300 | 380 | 240×2 | 300×2 | 300×2 |
| Pump flow | L/min | 28 | 38 | 38 | 45 | 28×2 | 38×2 | 38×2 |
| Alarms | Phase loss / low water / over-temperature / overload | Phase loss / low water / over-temperature / overload | Phase loss / low water / over-temperature / overload | Phase loss / low water / over-temperature / overload | Phase loss / low water / over-temperature / overload | Phase loss / low water / over-temperature / overload | Phase loss / low water / over-temperature / overload |
Technical data is for reference. Final specifications, voltage (e.g. 380 V / 50 Hz or 440 V / 60 Hz) and options are confirmed in your quotation.
Included with every order
Sourced, inspected and supported.
- Manufacturer audited in person by our team
- Pre-shipment inspection with photo and video report
- Export packing, documents and consolidated shipping
- Optional installation, commissioning and operator training
- Spare parts sourced directly from the manufacturer
Often sourced together
Request a quote
Get a quote for the Water Mould Temperature Controller, 35–120 °C.
Send a list, a tech pack or just a photo. A sourcing specialist replies within 12 hours with options and landed-cost pricing.