SKU FL-CHM-TPU-10
TPU Resin for Injection Moulding, 53–96 Shore A
Ten general-purpose TPU grades from very soft to rigid, with fast moulding and low shrinkage.
- Minimum order
- Confirmed in quotation
- Lead time
- Confirmed in quotation
- Warranty
- Shelf life and storage conditions confirmed in quotation
- Shipping terms
- FOB Shanghai / CIF to your port; dangerous-goods packing where required
Prefer to talk? WhatsApp us or email sales@footline-supply.com.
Overview
Thermoplastic polyurethane pellets for injection moulding shoe parts (TPU outsoles and sole units, heel counters, overlays, logos and buckles) as well as cable, automotive and electronic parts.
Ten grades run from a very soft 53 Shore A to a rigid 96 Shore A. They mould quickly with short cycle times, hold their dimensions with low shrinkage, and have a low coefficient of friction.
Applications
- TPU soles and sole units
- Heel counters and overlays
- Logos, buckles and trims
- Cable jackets and technical parts
Key features
- Affordable general-purpose range.
- Fast moulding and short cycle times.
- Dimensionally stable with low shrinkage.
- Good physical and mechanical properties.
- Low coefficient of friction.
Technical data
Available in 10 configurations. Scroll sideways on small screens to see every column.
| Parameter | Unit | 53A | 62A | 65A | 72A | 76A | 84A | 85A | 92A | 94A | 96A |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Hardness (ASTM D2240) | Shore A | 53±2 | 62±2 | 65±2 | 72±2 | 76±2 | 84±2 | 85±2 | 92±2 | 94±2 | 96±2 |
| Density (ASTM D792) | g/cm³ | 1.17 | 1.17 | 1.19 | 1.22 | 1.24 | 1.24 | 1.24 | 1.24 | 1.25 | 1.25 |
| Tensile strength (ASTM D412) | MPa | 15 | 17 | 25 | 27 | 30 | 30 | 35 | 30 | 30 | 35 |
| Elongation at break (ASTM D412) | % | 1100 | 800 | 650 | 600 | 550 | 500 | 650 | 550 | 550 | 550 |
| 100% modulus (ASTM D412) | MPa | 1.2 | 1.8 | 2.2 | 3.5 | 4.3 | 5 | 5 | 6.5 | 7.5 | 12 |
| Tear strength (ASTM D624) | kN/m | 50 | 60 | 70 | 85 | 95 | 100 | 105 | 110 | 120 | 140 |
| Abrasion loss (ASTM D5963) | mm³ | ≤70 | ≤70 | ≤70 | ≤70 | ≤70 | ≤70 | ≤85 | ≤110 | ≤110 | ≤110 |
| Processing temperature | °C | 170–190 | 170–190 | 170–190 | 170–190 | 170–190 | 180–200 | 190–210 | 190–210 | 190–210 | 200–220 |
Technical data is for reference. Final specifications, voltage (e.g. 380 V / 50 Hz or 440 V / 60 Hz) and options are confirmed in your quotation.
Included with every order
Sourced, inspected and supported.
- Manufacturer audited in person by our team
- Pre-shipment inspection with photo and video report
- Export packing, documents and consolidated shipping
- Optional installation, commissioning and operator training
- Spare parts sourced directly from the manufacturer
Often sourced together
FL-CHM-TPU-21
High-Strength, Abrasion-Resistant TPU, 87–97 Shore A
Tough TPU grades with up to 45 MPa tensile strength for hard-wearing soles and parts.
View specifications
FL-CHM-TPU-30
Transparent TPU Resin, 92–97 Shore A
Clear, fast-moulding TPU for transparent soles, air-cushion windows and crystal shoe parts.
View specifications
FL-CHM-TPU-FM
TPU Resin for Film & Sheet, 87–97 Shore A
Melt-stable TPU for extruding clear, waterproof-breathable films and overlays for shoe uppers.
View specificationsRequest a quote
Get a quote for the TPU Resin for Injection Moulding, 53–96 Shore A.
Send a list, a tech pack or just a photo. A sourcing specialist replies within 12 hours with options and landed-cost pricing.